Filtration

This section describes our standard range of filters. Available in three type configurations and filtration levels from 2.5 to 60micron particle sizes these filters ensure maximum protection for pressure regulators and other debris sensitive equipment.

We are able to supply most models suitable for HIGH PURITY, or OXYGEN service & N.A.C.E compliant materials but please specify this requirement with your enquiry or when placing an order.

Series 200 In-line, large capacity filter range. Available in either male or female configurations, 1/2" to 1-1/2" port sizes. These filters, when fitted in pipe systems are capable of element servicing & change-out without removal from the pipeline. Available in levels of filtration from 2.5 to 60micron particle size, pressures up to 414bar & various material options.

Series 201 Is a compact 'T' configuration filter range designed for in-line maintenance with the element being serviced or changed from the base. Available in port sizes 3/8" & 1/2", filtration levels from 5 to 40micron particle size & suitable for pressures up to 414bar. Various material options available. Alignment unions are also available for parallel thread options if & when required.

Series 202 Is a large capacity 'Y' configuration filter range designed for in-line maintenance with the element being serviced or changed without removal from the pipeline. Female ports in sizes 3/4" & 1" & levels of filtration between 15 & 40micron particle size. Available in various material options.

Please call if you require advice on product selection

Tel: ++44(0)1509 264242 Fax: ++44(0)1509 263308 enquiry

---------------------------------------------------------------------------------------------------------